SOLLYD Chemistry Limited, We Self Research and Develop All-sided Screen Printing Materials Including Silicone, Plastisol and Water Based Ink.
+86 0769 83138353

Wechat/Phone:+86 18819520080

Blog
Your Position: Homepage > Blog > FAQ > Silicone Solution > How to Get 3D Embossing Effect with Moulding Printing Silicone?

How to Get 3D Embossing Effect with Moulding Printing Silicone?

Emboss Moulding Printing Craft

Paint one layer of transparent liquid silicone ink on the back side of fabrics, then use mould printing machine to shape it with high temperature.

After that the emboss effect would show up on the face side.Mould Printing Machine

  1. Mould Printing Machine

    mould-printing-machine

  2. Double Stack Mould

    double-stack-mould

  3. High Density Mesh and Squeegee

    Operation Guide for Normal Fabrics

  1. Mould printing silicone add about 3% hardener, and a little silicone thinner for reference.
  2. Screen print one time on the back side with above silicone ink.
  3. 180-250℃ stamp with mould machine for 10-25 seconds.

Operation Guide for Leather

  1. Mould printing silicone add about 3% hardener, and a little silicone thinner for reference.
  2. Screen print one time on the back side with above silicone ink.
  3. Put the leather on the mould and paint one layer of glue on the mould area, the thickness should be the same as leather’s.
  4. 180-250℃ stamp with mould machine for 10-25 seconds.

Announcements

  1. Adjust printing silicone’s consistency to avoid ink go through the fabric and pay attention to fastness.
  2. Time and temperature for machine set should be on the basis of local environment.

mould-printing-craft2                                 mould-printing-craft1

Name:
Email:
Service:
Develop New Craft Make Samples Purchase Screen Printing Materials Consultation FAQ Price
Message: