RuiKe Industrial

High-elasticity printing textile silicone, because the colloid viscosity is too strong, the screen-passing performance is poor during screen printing. The commonly used silicone thinner RG-1080 improves the mesh-passing performance. The following is a high-elasticity silicone adding such as RG-1080 and adding RG-2660M-3 to do a screen-passing performance test comparison.

Raw material: High-elasticity printing textile silicone RG-2666, RG-1080, RG-2660M, curing agent RG-B80.

Tools: Balance scales 120 mesh screen printing screen, screen printing area 10cm*10cm, squeegee hardness 70 shore A, constant pressure printing machine

Test process: 1. RG-2666+10% 1080 as the subject matter A.

Note: (RG-2660M-3 is referred to as M-3)

Item1.

Item2.

                                                                  Item 1. （A+5-20%1080）

                                                          Item 2. （A+5-20%RG-2660M-3）

In conclusion:

The High-elastic silicone RG-2666 is added with 1080, with the increase of the addition amount, the better the Ink meshing performance. When the addition amount exceeds 25%, the amount of ink overflow begins to decrease due to the decrease of solid content.

Adding 5% RG-2660M-3 increases the ink flow greatly. With the increase of RG-2660M-3, the ink flow gradually increases.